Flux KardiLab RMA39i 10cc (in syringes)

KardiLab RMA39i 10cc Flux (in syringes)

KardiLab RMA39i 10cc Flux (in syringes) is a soldering flux based on highly purified mildly activated rosin (RMA - Rosin Mildly Activated), designed to ensure high-quality and clean soldering, especially in SMD technology. Supplied in a convenient syringe for accurate dosing.

Features:
1. Highly purified rosin base: ensures high-quality soldering and minimal residue.
2. Mild activation (RMA): has moderate activity, sufficient to effectively clean most surfaces, but is less aggressive compared to highly activated fluxes.
3. Low activation temperature (100°C): quickly begins to act when soldering temperature is reached.
4. No residual resistance after soldering: ensures good electrical characteristics of the connections.
5. No-clean technology: leaves very low levels of inactive residues after soldering, which do not require mandatory rinsing and do not cause corrosion.
6. Convenient syringe packaging: ensures precise and controlled dosing of flux to the desired area, which is especially important when working with small SMD components.
7. Tested for lack of corrosion: passed the BONO test (SAGEM / SCHNEIDER), confirming the absence of corrosion after 15 days in difficult conditions (under voltage, at high temperature and humidity).
8. Long shelf life: at least 12 months if storage conditions are observed.

Characteristics:
Flux type: RMA (Rosin Mildly Activated)
Base: Highly purified rosin
Volume: 10 cc 
Activity: Moderate
Activation temperature: 100°C
Residual residue after soldering: Low, inactive, "no-clean"
Corrosive activity of residues: None (confirmed by BONO test)
Application: Soldering SMD components, electronics repair, surface preparation for soldering
Storage conditions: In original sealed containers at 6°C-10°C (ideal), storage at normal room conditions in a dry place away from heat is also acceptable
Shelf life: Minimum 12 months
Safety: Use in a well-ventilated area, away from fire. Risk classification R42/43, safety classes S3/7 and S24/25 (indicate possible risks when inhaled and in contact with the skin)

KardiLab RMA39i flux is a reliable choice for craftsmen who repair and install electronics, especially SMD components, and value quality, cleanliness of soldering and the absence of the need for complex cleaning after completion of work.

You can order flux through the website or contact the manager at the phone number indicated on the website.