Solder paste Mechanic The King MCN999 20g (Sn63% / Pb37% / +183°С)

Code:
CB-00015293
Product passport
Product code CB-00015293

Details - Solder paste Mechanic The King MCN999 20g (Sn63% / Pb37% / +183°С)

Solder paste Mechanic The King MCN999 20g (Sn63% / Pb37% / +183°С)

Solder paste is a consumable for soldering, includes flux, as well as solder microparticles, the size of which is 20-38 microns.

Characteristic:
Alloy: (tin content - Sn63%) / (lead content - Pb37%);
Melting point: 183 °C;
Solder particle size: 20-38 microns;
Capacity - 20g.

Solder paste has the following advantages:
- high quality of soldering;
- resistance to spreading when heated;
- a small residual amount of flux after soldering;
- the possibility of using automated installation.

The paste is a rather viscous substance that should be mixed before use. When working, the surface of the printed circuit board must be cleaned and degreased, the board should be placed horizontally. Solder paste should preferably be applied with a spatula. The required amount is determined from the area of ​​the surfaces to be soldered.

When heated, the paste decreases in size after the flux boils. After that, the balls of solder that are part of the paste begin to melt.

The advantage of soldering paste is that it can be used for soldering without a soldering iron and even without a hair dryer. To do this, you need to apply the paste, for example, to the "twisting" of the wires, heat the connection with a gas burner or lighter, and the solder contained in the paste will firmly connect the wires.

You can order solder paste through the website or contact the manager by phone indicated on the website.

Specifications - Solder paste Mechanic The King MCN999 20g (Sn63% / Pb37% / +183°С)

More Information
Product code CB-00015293

Reviews - Solder paste Mechanic The King MCN999 20g (Sn63% / Pb37% / +183°С)

Write Your Own Review
Add your review:
Your Rating