We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
| Product code | CB-00022990 |
|---|
Solder Paste Mechanic XG-Z40 183°C (35gr)
Solder paste is a consumable for soldering, includes flux, as well as solder microparticles, the size of which is 24-45 microns.
Characteristics:
Type: no-clean
Composition: Sn-63%, Pb-37%;
Melting point: 183 °C;
Solder particle size: 24-45 microns
Packaging: 35 grams
Viscosity range: M = 600-800 10KCPS / H = 800-1000 10KCPS
Solder paste has the following advantages:
- high quality soldering;
- resistance to spreading when heated;
- small residual amount of flux after soldering;
- possibility of using automated assembly.
It is a fairly viscous substance that must be mixed before use. When working, the surface of the printed circuit board must be cleaned and degreased, and the board must be placed horizontally. It is advisable to apply solder paste with a spatula. The required amount is determined by the area of the surfaces to be soldered.
When heated, the paste decreases in size after the flux boils. After that, the solder balls that are part of the paste begin to melt.
Another advantage of solder paste is that it can be used for soldering without a soldering iron and even without a hair dryer. To do this, you need to apply the paste, for example, to the "twisting" of the wires, heat the connection with a gas burner or lighter, and the solder contained in the paste will firmly connect the wires.
You can order solder paste through the website or contact the manager by phone at the number indicated on the website.
| Product code | CB-00022990 |
|---|
The information below is required for social login
Sign In
Create New Account